Skrzynie są wykonane z kopolimeru propylenowego, który charakteryzuje się lekką wagą, trwałością i wysoką odpornością na chemikalia.

The cases will withstand temperatures from -23.3ºC (-10ºF) to +98.9ºC (+210ºF)

Due to the nature of the polypropylene being chemically inert, very little will attack the material. That also means that very few adhesives and paints will adhere satisfactorily. For an adhesive, we have found that 3M’s DP-8005 two-part adhesive works very well with our case material. It has also been reported that “Shoe Goo” works very well. For paint, Krylon has a product out called Fusion that they claim will adhere to polyolefin-based materials like polypropylene.

RoHS, or “Restriction on Hazardous Substances” - RoHS specifically bans or restricts the use of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated biphenyl ethers (PBDE). At the July 1, 2006 implementation of the RoHS provisions, Peli cases will not contain the banned or restricted materials and will therefore be RoHS compliant. NOTE: Directive 2000/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment – is aimed at reducing the hazardous materials content in electronic products as well as increasing the recycling efforts for these products.

Skrzynie Peli zostały przetestowane względem norm stopnia ochrony IP, Def Stan 81-41/STANAG 4280, MIL-C-4150J i ATA 300. Certyfikaty znajdują się w naszym archiwum, a ich kopie są dostępne na żądanie. Należy pamiętać, że do głębokich zanurzeń konieczne jest założenie wewnętrznych przegród.

Yes, the cases are water resistant. There is an o-ring in the lid and a Gore-Tex® membrane in the pressure equalization valve that keep water out of the case.

The Pressure Equalization Valve is a simple device. It consists of a housing with a hole through it that is covered with a thin Gore-Tex® membrane. According to the GoreTM tech sheet: “The microporous expanded polytetraflouroethylene (ePTFE) membrane continuously allows the free passage of gases and vapours, equalizing the pressure differential between the enclosure and ambient before it builds to the point that a seal is compromised. Water, dust and dirt are repelled by the hydrophobic membrane, thereby protecting expensive and sensitive electronics”.

Uszczelka jest wykonana z kauczuku EPDM czyli monomeru etylenowo-propylenowo-dienowego. Materiał jest znany z doskonałej odporności na ozon, warunki pogodowe i starzenie. Oprócz tego charakteryzuje się bardzo dobrą odpornością na wodę i parę, utrzymuje swoją elastyczność w niskich temperaturach. Kauczuk ten jest odporny na zasady, kwasy i utlenione rozpuszczalniki oraz zachowuje właściwości koloru. (Odporność na oleje, benzynę i rozpuszczalniki węglowodorowe.) Kauczuk EPDM jest używany w wielu zastosowaniach i jest doskonały w eksploatacji na powietrzu.

Custom sizes may be available based on many factors, like quantities or design requirements. The cases are available in custom colours based on customer requirements. There are certain conditions that must be met when making cases in custom colours. Please contact Peli’s sales department for more detailed information.

Lights have a circuit in which any arc or thermal effect (heat) produced under normal operating conditions of the equipment is not capable of igniting a particular flammable gas/vapor mixture, in the air.

Większość żarówek to żarówki wypełniene gazem - ksenonem, halogenem lub kryptonem. W wybranych modelach stosujemy również diody o dużej intensywności.

Think of a lighthouse in the palm of your hand. By mounting and pointing the LED backwards into the reflector, 100% of the light is captured and reflected forward. The result is a true collimated beam with brightness that rivals incandescent lights.

Alkaline torches will function with rechargeable batteries, but we strongly advise against this. The lamp life is cut drastically by doing this. Also, this will void the light's safety approvals.

Snop o punkcie laserowym jest wąskim snopem równoległym, a punkt zmodyfikowany jest snopem rozpływowym.

For more than 30 years, Peli’s guarantee has been simple: “You Break It, We Replace It…Forever™” which means that if for any reason you are not satisfied with the quality or performance of the Peli™ product you have purchased, Peli Products will gladly replace the product or refund your money (at your option) within 30 days after the purchase through the original Dealer/Retailer. Peli Products will continue to guarantee the product directly, against breakage or defects in workmanship. This guarantee does not cover the lamp or batteries in lights. The o-rings must be kept greased (and replaced if damaged) per product instructions. (Replace o-rings annually or when damaged.) Any liability, either expressed or implied is limited to replacement of the product. This guarantee is void only if the Peli™ product has been abused beyond normal and sensible wear and tear. The guarantee does not cover shark bite, bear attack and children under five.

Należy skontaktować się z dystrybutorem lub sprzedawcą, u którego wyrób został nabyty. Zwrotów należy dokonywać na adres Peli Products, S.A., Casp 33-B, Pral. 08010 Barcelona (Hiszpania).

Należy skontaktować się z dystrybutorem lub sprzedawcą, u którego wyrób został nabyty.

Wyczerpane lub odwrotnie włożone baterie.