1520EU Protector Valigia
SKU: 1520-020-110E
Interno: 44,9 × 31,8 × 17,1 cm
Esterno: 49,9 × 39,3 × 19,1 cm
Color: Black
Configurazione: Con schiuma
Condividere
L'attrezzatura delicata ha bisogno di protezione e, fin dal 1976, la risposta è sempre stata le valigia di protezione Peli™ Protector. Queste valigie sono progettate per essere robuste e viaggiare negli ambienti più difficoltosi sul pianeta. Le valigie Peli sono sopravvissute al freddo estremo dell'artico, così come al fuoco delle battaglie.
Queste robuste valigie sono progettate con una valvola di sfiato automatica, per l'equalizzazione della pressione, un coperchio con O-ring in silicone impermeabile, maniglie in gomma co-stampate e bulloneria in acciaio inox.
Configurations:
1520EU Protector Valigia
The Con divisori imbottiti (1524) configuration includes:
- 1520EU Protector Valigia
- Padded Dividers
1520EU Protector Valigia
The Senza schiuma (1520NF) configuration includes:
- 1520EU Protector Valigia
1520EU Protector Valigia
The Con schiuma (1520WF) configuration includes:
- 1520EU Protector Valigia
- Strati di schiuma
- Pick N Pluck® con schiuma a cellule aperte
- Impermeabile, a prova di urti e a tenuta di polvere
- Anima a celle aperte con struttura di pareti solide - robusta, leggera
- Comode impugnature in gomma sagomate
- Chiusure a due vie di facile apertura
- Struttura e protettori del lucchetto in acciaio inox
- Valvola di equalizzazione automatica della pressione - bilancia la pressione interna e impedisce all'acqua di entrare
- Leggendaria garanzia Peli a vita**
- Guarnizione o-ring
- *Garanzia a vita non applicabile nei casi vietati dalla legge
- Prodotto in Germania
ACCESSORI
ALTRI PRODOTTI DI INTERESSE
DETTAGLI
Dimensioni
Measurements
Pesi
Materiale
Temperatures
Approvals
Recensioni dei clienti
I bought this to carry my Canon XA10 camcorder and accessories. For that job it's perfect, though a little 'chunky' when you consider the size of the camera. The pick & pluck foam is much easier to use than the option of cutting out compartments yourself. It's basically a lot of 1cm square foam pieces (shaped a bit like big, grey foam french fries) the length of the depth of the case welded together in a way which keeps them held together, yet you can pluck out and remove any 1cm square section you like to create precisely shaped cavities. You can extract several together in a block to create larger cavities, trim the removed piece to a shorter length and re-insert to create cavities of limited depth too. Ingenious. The seal is very positive and the catches are very firm and unlikely to come open accidentally. The robustness of Pelican cases is legendary so you don't need me to tell you. Suffice to say that you would jump up and down on it and not damage the contents. My one complaint is that there is nowhere to attach a shoulder strap. There are plastic sections which you could drill through to create your own strap mounting point, but it would be nice to have them created at the factory. All in all, an excellent case, but make very sure you check the internal dimensions before ordering!
I bought this to carry my Canon XA10 camcorder and accessories. For that job it's perfect, though a little 'chunky' when you consider the size of the camera. The pick & pluck foam is much easier to use than the option of cutting out compartments yourself. It's basically a lot of 1cm square foam pieces (shaped a bit like big, grey foam french fries) the length of the depth of the case welded together in a way which keeps them held together, yet you can pluck out and remove any 1cm square section you like to create precisely shaped cavities. You can extract several together in a block to create larger cavities, trim the removed piece to a shorter length and re-insert to create cavities of limited depth too. Ingenious. The seal is very positive and the catches are very firm and unlikely to come open accidentally. The robustness of Pelican cases is legendary so you don't need me to tell you. Suffice to say that you would jump up and down on it and not damage the contents. My one complaint is that there is nowhere to attach a shoulder strap. There are plastic sections which you could drill through to create your own strap mounting point, but it would be nice to have them created at the factory. All in all, an excellent case, but make very sure you check the internal dimensions before ordering!
